Effects of the joining process on the microstructure and properties of liquid-phase-sintered SiC-SiC joints formed with Ti foil

The joining of liquid-phase sintered SiC (LPS-SiC) ceramics was conducted using spark plasma sintering (SPS), through solid state diffusion bonding, with Ti-metal foil as a joining interlayer. Samples were joined at 1400 °C, under applied pressures of either 10 or 30 MPa, and with different atmospheres (argon, Ar, vs. vacuum). It was demonstrated that the shear strength of the joints increased with an increase in the applied joining pressure. The joining atmosphere also affected on both the microstructure and shear strength of the SiC joints. The composition and microstructure of the interlayer were examined to understand the mechanism. As a result, a SiC-SiC joining with a good mechanical performance could be achieved under an Ar environment, which in turn could provide a cost-effective approach and greatly widen the applications of SiC ceramic components with complex shape.     

基于包装功能的时间–温度指示器与食品新鲜度指示器研究进展

目的 从包装功能实现的角度分析研究时间–温度指示器和食品新鲜度指示器的原理、类型与发展趋势，指出开发设计时间–温度指示器和食品新鲜度指示器应完成的包装功能，为有效实现包装交流功能提供研究思路和技术支持。方法 列出现有食品包装功能在物理环境、周围环境和人类环境下的实现矩阵，通过研究时间–温度指示器和食品新鲜度指示器的实现原理和所满足的包装交流功能，探讨这2种技术提高矩阵中分值较低元素的可行性。结果 时间–温度指示器监测食品所经历的时间、温度的完整历程，有助于提高实现矩阵中ComA元素的分值;食品新鲜度指示器提供生理变化或微生物生长引起的食品质量变化的定性或半定量信息，有助于提高实现矩阵中ComH元素的分值。结论 时间–温度指示器和食品新鲜度指示器能够有效提升食品包装的交流功能，保证消费者安全，减少资源浪费，具有广阔的发展前景。     

PBAT‒PLA膜袋受控需氧堆肥条件下的降解研究

目的 通过对广泛使用的PBAT–PLA生物降解膜袋在受控需氧堆肥条件下的降解机制研究，为生物降解塑料的大规模推广提供重要理论基础。方法 根据GB/T 19277.1—2011，在(58±2)℃需氧条件下，对PBAT–PLA膜袋进行为期160 d的生物降解测试(即工业堆肥)，并以常见的可降解材料微晶纤维素作为参比样品。对降解前后的材料进行红外、扫描电镜、能谱分析，并结合其所在堆肥样本的脂肪酶活性，从多角度探寻降解机制。结果 PBAT–PLA膜袋与微晶纤维素所在的堆肥脂肪酶活性都达到空白堆肥的3倍以上。红外显示由微晶纤维素水分子吸附、糖环打开、基团氧化形成的吸收峰加强，PBAT–PLA膜袋中的酯键峰明显减弱;扫描电镜发现降解的PBAT–PLA膜袋表面覆盖了微生物膜;能谱分析发现，碳元素大幅减少，氧元素增加。结论 微生物在PBAT–PLA膜袋表面生长形成生物膜，分泌大量脂肪酶，水解PBAT–PLA的酯键，使聚合物降解为不同链长的中间体或小分子，同时伴随着氧化，随后被作为碳源，在相关微生物体内被代谢利用，形成最终产物。     

基于纸浆纤维的贵重物品内包装塑造系统研究

为解决贵重物品与其内包装“契合度”不高的问题，提出基于纸浆纤维的贵重物品内包装塑造系统。系统通过三维扫描获取待包装物品的点云信息，经主控计算机进行数据处理，以下位机为执行中枢，辅之其他外部设备，利用纸浆纤维为贵重物品塑造“量身定制”的内包装，提升内包装契合度，增强保护效果，绿色环保，安全稳定。     

Analysis and proposition of limiting current density measurement protocol

Limiting current density at different temperatures, backpressures, and balance gases can be used to separate molecular diffusion resistance, Knudsen diffusion resistance and local transport resistance of membrane electrode assembly (MEA). However, the measurement of limiting current density has no unified protocol. The diverse choices in the literature, either in the control of current or voltage or in the atmosphere like relative humidity and O₂ concentrations, make it difficult to compare the results and identify the true bottleneck hindering the mass transport. In this work, the current-voltage curves obtained by current scanning/stepping and voltage scanning/stepping methods under dilute O₂ of different concentrations and a wide range of relative humidity were measured and analyzed systematically. It is found that the voltage stepping method is superior to the other three ways of control for the reliable determination of the limiting current density. Aided with simultaneous electrochemical impedance spectroscopy measurement, the limiting current density can be determined with pinpoint accuracy. When the limiting current density is just used to qualitatively evaluate different MEA, the voltage scanning method can be used instead for its high time efficiency. The selection of the atmosphere also plays an important role in suppressing the distortion from excessive water and reducing the spurious contribution from proton conduction resistance. It is found that O₂ concentrations at 0.5 vol% and relative humidity at 90% can give the best estimation of O₂ transport resistance in membrane electrode assembly.     

Metabolic Glycoengineering in hMSC-TERT as a Model for Skeletal Precursors by Using Modified Azide/Alkyne Monosaccharides

Metabolic glycoengineering enables a directed modification of cell surfaces by introducing target molecules to surface proteins displaying new features. Biochemical pathways involving glycans differ in dependence on the cell type; therefore, this technique should be tailored for the best results. We characterized metabolic glycoengineering in telomerase-immortalized human mesenchymal stromal cells (hMSC-TERT) as a model for primary hMSC, to investigate its applicability in TERT-modified cell lines. The metabolic incorporation of N-azidoacetylmannosamine (Ac₄ManNAz) and N-alkyneacetylmannosamine (Ac₄ManNAl) into the glycocalyx as a first step in the glycoengineering process revealed no adverse effects on cell viability or gene expression, and the in vitro multipotency (osteogenic and adipogenic differentiation potential) was maintained under these adapted culture conditions. In the second step, glycoengineered cells were modified with fluorescent dyes using Cu-mediated click chemistry. In these analyses, the two mannose derivatives showed superior incorporation efficiencies compared to glucose and galactose isomers. In time-dependent experiments, the incorporation of Ac₄ManNAz was detectable for up to six days while Ac₄ManNAl-derived metabolites were absent after two days. Taken together, these findings demonstrate the successful metabolic glycoengineering of immortalized hMSC resulting in transient cell surface modifications, and thus present a useful model to address different scientific questions regarding glycosylation processes in skeletal precursors.     

"不知火"柑橘全自动包装生产线的设计与研究

目的为了解决柑橘在实际包装过程中因于人工手动装袋、装箱等导致的效率低下问题,设计一条全自动柑橘包装生产线。方法基于“不知火”柑橘的特殊体型特征,使用传送带分级装置对其进行分级;通过倾斜皮带解决柑橘排列姿态的整理问题;经给袋式包装机装袋后,采用扭结式扎口装置对其进行封口;利用并联机器人对其进行装箱。通过计算生产节拍,合理规划每个工序的循环时间,并通过Flexsim软件对该生产线进行仿真分析与平衡优化。结果该生产线整体效率由89%提升到93%,能够正常运行且满足生产力的需求。结论该柑橘包装生产线实现了柑橘的分级、整料、装袋、装箱等工序,降低了工作强度,提高了生产效率,实现了包装过程的自动化。     

葫芦容器生态包装设计探析

目的 研究葫芦容器作为生态材料在包装设计中的运用.方法 从葫芦容器的渊源和表现形式两个方面探究,明晰了葫芦作为容器就具备存放盛装、便利实用的包装功能.分析和探讨葫芦作为包装容器的优势,体现在葫芦材质、葫芦造型、葫芦工艺方面,归纳总结出葫芦是现成的生态包装容器,材质安全无害易降解,自然培育无环境破坏压力,符合绿色环保要求.结论 结合实践设计提出葫芦容器的生态化、形态化、功能性的设计延伸再利用,以及葫芦容器的产业化生产的可行性探讨,以期使葫芦容器得到传承与推广.     

木质纤维与水泥共同改良软土的力学性能与微观机制分析

通过压实试验、无侧限抗压强度试验和劈裂试验,分析不同木质纤维含量、水泥含量和固化时间对软土力学性能的影响规律,探讨木质纤维、水泥改良软土的微观机制。结果表明,木质纤维的加入对水泥改良软土的击实特性有显著的影响;木质纤维与水泥可有效改善土体的抗压和劈裂抗拉强度,随着木质纤维含量的增加,改良土的抗压和劈裂抗拉强度呈现出明显的“驼峰”现象,并在木质纤维含量为0.25%时最大;木质纤维与水化产物、软土颗粒形成互锁效应,增大了改良土的摩擦力,同时木质纤维还承担一定的拉伸强度,使改良土的劈裂强度增加。     

Effect of Newtonian heating/cooling on free convection in an annular permeable region in the presence of heat source/sink

The influence of Newtonian heating/cooling in the presence of heat source/sink has been investigated on laminar free convective flow in a vertical annular permeable region. The mathematical model for the problem has been considered as a boundary value problem consisting of two simultaneous ordinary differential equations. The boundary value problem has been transformed to nondimensional form. This has given rise to a number of parameters representing both geometrical and physical features of the problem. Closed‐form analytical solutions of the governing equations have been obtained for two different cases of internal heat generation/absorption. To assess the effects of governing parameters on the fluid velocity and temperature, a number of profiles of these field variables have been presented. The efficacy of the distinct processes on the field variables has been discussed extensively. The main outcome obtained in this study is that the velocity as well as temperature is enhanced in the case of the Newtonian heating while the opposite behavior occurs in the Newtonian cooling for both cases of source and sink. Furthermore, the influence of the governing parameters has been shown on the skin friction, volume flow rate, and the Nusselt number.